MrKen_pr09x
New Member
Portable VLC media player 1.1.0 - Final - Smith.N Studio!
VLC media player 1.1.0 - Final
VLC (trước đây mang tên VideoLAN Client) là trình xem phim nghe nhạc đa phương tiên, đa hệ điều hành, chạy không cần cài đặt, hỗ trợ nhiều định dạng phim và nhạc (MPEG-1, MPEG-2, MPEG-4, DivX, mp3, Ogg, OGM, MOV, wma, wmv...) cũng như DVD, VCD, cùng nhiều vô số các giao thức truyền phát đa dạng.
Dự án VideoLAN nhắm đến việc truyền phát các nội dung đa phương tiện MPEG-1, MPEG-2, MPEG-4 và DivX, DVD, các kênh vệ tinh số, các kênh truyền hình mặt đất số cùng các phim phim phát trục tiếp trên các mạng IPv4 hay IPv6 băng thông rộng hay đa truyền phát trên nhiều hệ điều hành.
VideoLAN cũng cung cấp một trình chơi đa phương tiện đa hệ điều hành, VLC, có thể được dùng để đọc luồng truyền phát từ mạng hay phát phim ngay trên máy. Chương trình hỗ trợ mọi hệ thống GNU/Linux, BSD, Windows, Mac OS X, BeOS, Solaris, QNX, Familiar Linux...
Những chức năng của VLC (VideoLAN Client):
Viết lại phần danh sách chơi (theo cấu trúc cây, xử lý trước dữ liệu nhập...)Nhiều cải thiện cho phần PreferencesBổ sung các bộ đọc và xử lý XMLHỗ trợ SSL/TLS trên máy kháchNhiều cải thiện đáng kể cho MatroskaHỗ trợ SOCKS proxyHỗ trợ Shoutcast Meta-dataHỗ trợ các luồng truyền tải âm thanh sơ khai (HE-)AACTiVo demuxerThành phần truy xuất Samba (chia sẻ trên Windows)Bộ mã hóa/giải mã DiracBộ mã hóa/giải mã PNGHỗ trợ Apple Lossless Audio CodecCác thành phần khám phá dịch vụ (thành phần SAP hoàn toàn mới, HAL, DAAP (chia sẻ trên iTunes), shoutcast)Hỗ trợ LPCM 20/24 bitHỗ trợ chụp ảnh phim đang phát (png hay jpg)Xuất toàn bộ phim ra ảnh (png)Mosaic (hệ thống hình trong hình)Phiên bản port cho Pocket PCPlugin ActiveX hoàn toàn mới cho Internet Explorer
Changes in VLC (VideoLAN Client) 1.1.0:
• Important changes for packagers:
- The module cache has moved to ${libdir}/vlc/. The module cache can now be generated at càitime except if you use staged installation. In the later case, you can generate the module cache in your post-inst script by invoking 'vlc-cache-gen'. If the module cache is not present and vlc can't write in ${libdir}/vlc/, it will result it vlc taking a long time to launch each time.
- Most X11-related plugins now use XCB instead of Xlib. VLC now uses
- xproto,
- xcb, xcb-shm, xcb-xv, xcb-randr (from libxcb),
- xcb-keysyms (from xcb-utils),
- x11-xcb (from libx11) - only for GLX support.
- On X11 platforms, a _working_ phiên bản of xdg-screensaver is typically required to inhibit the screensaver during video playback.• Access:
- Support for the sftp protocol
- Support for CDDB servers for Audio-CD on the Windows port
- New memory input (imem) access and access_demux module to feed VLC from data in memory
- New avio module to use libavformat capabilities for network streams, like rtmp://
- Port of the screen module from Xlib to XCB
- Port of the dc1394 module from libdc1394 to libdc1394 v2.0• Decoders:
- Support for DxVA2 for H.264 decoding on GPU on Windows Vista and 7
- Support for VAAPI for H.264 decoding on GPU on GNU/Linux
- Audio/Video decoders and encoders using OpenMAX IL components for DSP usage
- Support for HD-DVB subtitles - Display Definition Segment
- Support PGS subtitles for Blu-Ray
- Invmem module improvements
- Support for Atrac1 audio codec
- Support for SSE3 and SSE4 capabilities in some codecs
- Multiple improvements for subtitles styles .SRT and .SSA
- Support for Indeo5 video codec
- Support for Windows Media Speech (Voice) audio codec natively on all platforms
- Support for AMR-NB audio codec on the Windows and Mac port
- Improvements on the FLAC format (7.1 channels and 88.2/176.4/192 kHz support)
- Direct rendering is always used with H.264 in avcodec module
- Support for MPEG-4 ALS lossless audio codec• Demuxers:
- Support for .aob files from DVD-Audio (MLP and LPCM) (Full disc support is NOT present yet)
- Support for ADPCM in .flv streams
- Support for TwinVQ (.vqf) and AMV (.amv) files
- Various EGP improvements
- Support for embedded subtitles in OpenDML and legacy .avi files• Playlist:
- WPL and ZPL playlist support
- Lua scripts for Mpora, Vimeo playback and Rockbox FM radios
- New Play-And-Pause function to stop playback on latest video image
- Podcast images are now displayed• Video Output:
- Rewrite of the video output core and most video outputs
- Added desktop mode to the Direct3D output module. It differs from DirectX desktop mode, because it hides the desktop icons, but reacts to mouse clicks.
- New x11, glx and xv modules based on XCB
- New deinterlacing modes based on yadif and yadif(x2)
- New audio/video filter to show audio level on the video output
- Enhanced AtmoLight filter with hardware support for Classic AtmoLight, Quattro AtmoLight (use just 4 Classic AtmoLights as one), MoMoLight, Simple serial DMX controller• Extensions:
- New content extensions lua framework
- IMDb extension• Audio filters:
- Chorus/Flanger audio filter
- 3F1R to stereo down-mix filter
- Dolby mixer, parameterized equalizer, trivial mixer, scaletempo, bandlimited resampler, linear resampler, ugly resampler, converter_fixed, DTS to SPDIF and A/52 to SPDIF filters have been upgraded to the "audio filter2" API
- NEON assembly audio converter module
- Converter filters have been rewritten and extended to support s32 as input• Visualization:
- Support of .milk visualization files using projectM libraries• Service discovery:
- Service discoveries can now be written in lua
- Service discovery for Picture/Music/Video user directories
- Service discovery based on libudev
- Shoutcast Service discoveries are now removed• Encoders:
- x264, add psy-rd parameter and change default settings
- x264, add profile-limitter same way as x264.exe has, for example #transcode {vcodec=h264,venc=x264{profile=baseline,level=1.2} ,vb=384,width=320,height=176}
- x264, defaults to crf=23 as x264.exe-does, if bitrate is given, uses ABR and if qp-value is set uses CQP- libx264-version 0.76 or higher is required
• Stream output:
- New smem module, streaming to memory
- Allow duplicate outputs to be merged, like:
--sout "#duplicate{dst=transcode{vcodec=mp2v},select=es=0 ,dst=transcode,select=es=1}:std{...}"• Interfaces:
- Renamed the legacy rc, telnet and http interfaces to oldrc, oldtelnet and oldhttp.
- rc, telnet and http are now implemented using the lua interface system.• Windows port:
- Integration in Windows 7 taskbar
- Experimental playback of .Midi files is supported through fluidsynth's module• Maemo port:
- Multiple improvements for N900 compliance and efficiency
- Support for HW accelerated video decoding on N900
- Improvements to the maemo/hildon interface• Misc:
- new sqlite module
- --save-config command line option not supported anymore.
- Fixed and reenabled netsync module.• Bindings:
- new C++ wrapper around libVLC: libVLCpp
- phonon bindings are now usable• Removed modules:
- csri codec: use the libass module instead.
- galaktos visualisation: use the new projectM module instead.
- showintf: Useless in Qt and on Mac OS X
- transrate: broken since too long
- Xlib x11, Xlib xvideo, Xlib glx: Use the new XCB modules instead.
- HAL: Use libudev instead.
- gtk_main, gtk_main2, gnome_main, gnome_main2 and pda interfaces
- WinCE, BeOS and qnx interfaces
- opie, qte and qte_main interfaces
- linear_resampler and trivial_resampler are removed: use the ugly one.
- XvMC accelerated modules: use VAAPI instead.
- MGA (Matroska) for Linux: use Linux Framebuffer (or X) instead.
- opengllayer: use macosx_video instead.
- cddax: use cdda instead.
- cmml and tarkin codecs are removed because they are dead codecs.
- realaudio codecs: use libavcodec
- access_file removed in favor of filesystem
- RTMP input and output: use avio module
[HOMEPAGE="http://www.videolan.org/vlc/"]Homepage - Trang chủ[/HOMEPAGE]
Size: 16.04 MB
VLC media player 1.1.0 - Final
VLC (trước đây mang tên VideoLAN Client) là trình xem phim nghe nhạc đa phương tiên, đa hệ điều hành, chạy không cần cài đặt, hỗ trợ nhiều định dạng phim và nhạc (MPEG-1, MPEG-2, MPEG-4, DivX, mp3, Ogg, OGM, MOV, wma, wmv...) cũng như DVD, VCD, cùng nhiều vô số các giao thức truyền phát đa dạng.
Dự án VideoLAN nhắm đến việc truyền phát các nội dung đa phương tiện MPEG-1, MPEG-2, MPEG-4 và DivX, DVD, các kênh vệ tinh số, các kênh truyền hình mặt đất số cùng các phim phim phát trục tiếp trên các mạng IPv4 hay IPv6 băng thông rộng hay đa truyền phát trên nhiều hệ điều hành.
VideoLAN cũng cung cấp một trình chơi đa phương tiện đa hệ điều hành, VLC, có thể được dùng để đọc luồng truyền phát từ mạng hay phát phim ngay trên máy. Chương trình hỗ trợ mọi hệ thống GNU/Linux, BSD, Windows, Mac OS X, BeOS, Solaris, QNX, Familiar Linux...
Những chức năng của VLC (VideoLAN Client):
Viết lại phần danh sách chơi (theo cấu trúc cây, xử lý trước dữ liệu nhập...)Nhiều cải thiện cho phần PreferencesBổ sung các bộ đọc và xử lý XMLHỗ trợ SSL/TLS trên máy kháchNhiều cải thiện đáng kể cho MatroskaHỗ trợ SOCKS proxyHỗ trợ Shoutcast Meta-dataHỗ trợ các luồng truyền tải âm thanh sơ khai (HE-)AACTiVo demuxerThành phần truy xuất Samba (chia sẻ trên Windows)Bộ mã hóa/giải mã DiracBộ mã hóa/giải mã PNGHỗ trợ Apple Lossless Audio CodecCác thành phần khám phá dịch vụ (thành phần SAP hoàn toàn mới, HAL, DAAP (chia sẻ trên iTunes), shoutcast)Hỗ trợ LPCM 20/24 bitHỗ trợ chụp ảnh phim đang phát (png hay jpg)Xuất toàn bộ phim ra ảnh (png)Mosaic (hệ thống hình trong hình)Phiên bản port cho Pocket PCPlugin ActiveX hoàn toàn mới cho Internet Explorer
Changes in VLC (VideoLAN Client) 1.1.0:
• Important changes for packagers:
- The module cache has moved to ${libdir}/vlc/. The module cache can now be generated at càitime except if you use staged installation. In the later case, you can generate the module cache in your post-inst script by invoking 'vlc-cache-gen'. If the module cache is not present and vlc can't write in ${libdir}/vlc/, it will result it vlc taking a long time to launch each time.
- Most X11-related plugins now use XCB instead of Xlib. VLC now uses
- xproto,
- xcb, xcb-shm, xcb-xv, xcb-randr (from libxcb),
- xcb-keysyms (from xcb-utils),
- x11-xcb (from libx11) - only for GLX support.
- On X11 platforms, a _working_ phiên bản of xdg-screensaver is typically required to inhibit the screensaver during video playback.• Access:
- Support for the sftp protocol
- Support for CDDB servers for Audio-CD on the Windows port
- New memory input (imem) access and access_demux module to feed VLC from data in memory
- New avio module to use libavformat capabilities for network streams, like rtmp://
- Port of the screen module from Xlib to XCB
- Port of the dc1394 module from libdc1394 to libdc1394 v2.0• Decoders:
- Support for DxVA2 for H.264 decoding on GPU on Windows Vista and 7
- Support for VAAPI for H.264 decoding on GPU on GNU/Linux
- Audio/Video decoders and encoders using OpenMAX IL components for DSP usage
- Support for HD-DVB subtitles - Display Definition Segment
- Support PGS subtitles for Blu-Ray
- Invmem module improvements
- Support for Atrac1 audio codec
- Support for SSE3 and SSE4 capabilities in some codecs
- Multiple improvements for subtitles styles .SRT and .SSA
- Support for Indeo5 video codec
- Support for Windows Media Speech (Voice) audio codec natively on all platforms
- Support for AMR-NB audio codec on the Windows and Mac port
- Improvements on the FLAC format (7.1 channels and 88.2/176.4/192 kHz support)
- Direct rendering is always used with H.264 in avcodec module
- Support for MPEG-4 ALS lossless audio codec• Demuxers:
- Support for .aob files from DVD-Audio (MLP and LPCM) (Full disc support is NOT present yet)
- Support for ADPCM in .flv streams
- Support for TwinVQ (.vqf) and AMV (.amv) files
- Various EGP improvements
- Support for embedded subtitles in OpenDML and legacy .avi files• Playlist:
- WPL and ZPL playlist support
- Lua scripts for Mpora, Vimeo playback and Rockbox FM radios
- New Play-And-Pause function to stop playback on latest video image
- Podcast images are now displayed• Video Output:
- Rewrite of the video output core and most video outputs
- Added desktop mode to the Direct3D output module. It differs from DirectX desktop mode, because it hides the desktop icons, but reacts to mouse clicks.
- New x11, glx and xv modules based on XCB
- New deinterlacing modes based on yadif and yadif(x2)
- New audio/video filter to show audio level on the video output
- Enhanced AtmoLight filter with hardware support for Classic AtmoLight, Quattro AtmoLight (use just 4 Classic AtmoLights as one), MoMoLight, Simple serial DMX controller• Extensions:
- New content extensions lua framework
- IMDb extension• Audio filters:
- Chorus/Flanger audio filter
- 3F1R to stereo down-mix filter
- Dolby mixer, parameterized equalizer, trivial mixer, scaletempo, bandlimited resampler, linear resampler, ugly resampler, converter_fixed, DTS to SPDIF and A/52 to SPDIF filters have been upgraded to the "audio filter2" API
- NEON assembly audio converter module
- Converter filters have been rewritten and extended to support s32 as input• Visualization:
- Support of .milk visualization files using projectM libraries• Service discovery:
- Service discoveries can now be written in lua
- Service discovery for Picture/Music/Video user directories
- Service discovery based on libudev
- Shoutcast Service discoveries are now removed• Encoders:
- x264, add psy-rd parameter and change default settings
- x264, add profile-limitter same way as x264.exe has, for example #transcode {vcodec=h264,venc=x264{profile=baseline,level=1.2} ,vb=384,width=320,height=176}
- x264, defaults to crf=23 as x264.exe-does, if bitrate is given, uses ABR and if qp-value is set uses CQP- libx264-version 0.76 or higher is required
• Stream output:
- New smem module, streaming to memory
- Allow duplicate outputs to be merged, like:
--sout "#duplicate{dst=transcode{vcodec=mp2v},select=es=0 ,dst=transcode,select=es=1}:std{...}"• Interfaces:
- Renamed the legacy rc, telnet and http interfaces to oldrc, oldtelnet and oldhttp.
- rc, telnet and http are now implemented using the lua interface system.• Windows port:
- Integration in Windows 7 taskbar
- Experimental playback of .Midi files is supported through fluidsynth's module• Maemo port:
- Multiple improvements for N900 compliance and efficiency
- Support for HW accelerated video decoding on N900
- Improvements to the maemo/hildon interface• Misc:
- new sqlite module
- --save-config command line option not supported anymore.
- Fixed and reenabled netsync module.• Bindings:
- new C++ wrapper around libVLC: libVLCpp
- phonon bindings are now usable• Removed modules:
- csri codec: use the libass module instead.
- galaktos visualisation: use the new projectM module instead.
- showintf: Useless in Qt and on Mac OS X
- transrate: broken since too long
- Xlib x11, Xlib xvideo, Xlib glx: Use the new XCB modules instead.
- HAL: Use libudev instead.
- gtk_main, gtk_main2, gnome_main, gnome_main2 and pda interfaces
- WinCE, BeOS and qnx interfaces
- opie, qte and qte_main interfaces
- linear_resampler and trivial_resampler are removed: use the ugly one.
- XvMC accelerated modules: use VAAPI instead.
- MGA (Matroska) for Linux: use Linux Framebuffer (or X) instead.
- opengllayer: use macosx_video instead.
- cddax: use cdda instead.
- cmml and tarkin codecs are removed because they are dead codecs.
- realaudio codecs: use libavcodec
- access_file removed in favor of filesystem
- RTMP input and output: use avio module
[HOMEPAGE="http://www.videolan.org/vlc/"]Homepage - Trang chủ[/HOMEPAGE]
Size: 16.04 MB
You must be registered for see links
Smith Nguyen Studio!