blog_tieuquy

New Member
các bạn tải miễn phí ebook: Knowledge - ANSI/AWS A2.4-79


Weld Symbols on a Drawing – Refresh Your 

Knowledge ­ ANSI/AWS A2.4­79 




The  eight   elements  which   may   appear   in   a   welding   symbol   are:­ 


reference line, arrow, basic weld symbols, dimensions and other data,  
supplementary   symbols,   finish   symbols,   tail   and   specification   and  


process or other reference. Let us discuss the one by one.


Reference   Line:  This   is   the   basis   of   the   welding   symbol.   All   other 


elements are oriented with respect to this line. The arrow is affixed to one 


end   and   a   tail,   when   necessary,   is   affixed   to   the   other.  


Arrow: This connects the reference line to one side of the joint in the case 


of groove, fillet, flange, and flash or upset welding symbols. This side of 


the  joint  is  known  as  the  arrow  side  of  the  joint.  The   opposite  side  is 


known as the other side of the joint. In the case of plug, slot, projection, 


and seam welding symbols, the arrow connects the reference line to the 


outer surface of one of the members of the joint at the center line of the 


weld. In this case the member to which the arrow points is the arrow side 


member: the other member is the other side member. In the case of bevel 
and   J­groove   weld   symbols,



các bạn download về để xem đầy đủ nhé

¨°o_O (Sống tốt mỗi ngày) o_O°

Sống đẹp mỗi ngày
 

Các chủ đề có liên quan khác

Top