Chỉnh sửa file BOOT.INI an toàn, Để Vào Dos, Ghost...

cho hoi dong lenh windows 7 viet the nao?

cho hoi dong lenh windows 7 viet the nao? PHP Code: Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\ADMIN>bootcfg /?

BOOTCFG /parameter [arguments]

Description:
    This command line tool can be used to configure, query, change or
    delete the boot entry settings in the BOOT.INI file.

Parameter List:
    /Copy       Makes a copy of an existing boot entry.

    /Delete     Deletes an existing boot entry from the BOOT.INI file.

    /Query      Displays the current boot entries and their settings.

    /Raw        Allows the user to specify any switch to be added.

    /Timeout    Allows the user to change the Timeout value.

    /Default    Allows the user to change the Default boot entry.

    /EMS        Allows the user to configure the /redirect switch
                for headless support.

    /Debug      Allows the user to specify the port and baudrate for
                remote debugging.

    /Addsw      Allows the user to add predefined switches.

    /Rmsw       Allows the user to remove predefined switches.

    /Dbg1394    Allows the user to configure 1394 port for debugging.

    /?          Displays this help message.

Examples:
    BOOTCFG /Copy /?
    BOOTCFG /Delete /?
    BOOTCFG /Query /?
    BOOTCFG /Raw /?
    BOOTCFG /Timeout /?
    BOOTCFG /EMS /?
    BOOTCFG /Debug /?
    BOOTCFG /Addsw /?
    BOOTCFG /Rmsw /?
    BOOTCFG /Dbg1394 /?
    BOOTCFG /Default /?
    BOOTCFG /?

WARNING: BOOT.INI is used for boot options on Windows XP and earlier
         operating systems.  Use the BCDEDIT command line tool to modify
         Windows Vista boot options.

C:\Users\ADMIN> 



---------- Bài thêm lúc 19:08 ---------- Bài trước là lúc 19:07 ----------

Use the BCDEDIT command line tool to modify Windows Vista boot options.

---------- Bài thêm lúc 19:09 ---------- Bài trước là lúc 19:08 ----------

Code: C:\Users\ADMIN>bcdedit /?

BCDEDIT - Boot Configuration Data Store Editor

The Bcdedit.exe command-line tool modifies the boot configuration data store.
The boot configuration data store contains boot configuration parameters and
controls how the operating system is booted. These parameters were previously
in the Boot.ini file (in BIOS-based operating systems) or in the nonvolatile
RAM entries (in Extensible Firmware Interface-based operating systems). You can
use Bcdedit.exe to add, delete, edit, and append entries in the boot
configuration data store.

For detailed command and option information, type bcdedit.exe /? . For
example, to display detailed information about the /createstore command, type:

bcdedit.exe /? /createstore

For an alphabetical list of topics in this Giúp file, run "bcdedit /? TOPICS".

Commands that operate on a store
================================
/createstore Creates a new and empty boot configuration data store.
/export Exports the contents of the system store to a file. This file
can be used later to restore the state of the system store.
/import Restores the state of the system store using a backup file
created with the /export command.
/sysstore Sets the system store device (only affects EFI systems, does
not persist across reboots, and is only used in cases where
the system store device is ambiguous).

Commands that operate on entries in a store
===========================================
/copy Makes copies of entries in the store.
/create Creates new entries in the store.
/delete Deletes entries from the store.
/mirror Creates mirror of entries in the store.

Run bcdedit /? ID for information about identifiers used by these commands.

Commands that operate on entry options
======================================
/deletevalue Deletes entry options from the store.
/set Sets entry option values in the store.

Run bcdedit /? TYPES for a list of datatypes used by these commands.
Run bcdedit /? FORMATS for a list of valid data formats.

Commands that control output
============================
/enum Lists entries in the store.
/v Command-line option that displays entry identifiers in full,
rather than using names for well-known identifiers.
Use /v by itself as a command to display entry identifiers
in full for the ACTIVE type.

Running "bcdedit" by itself is equivalent to running "bcdedit /enum ACTIVE".

Commands that control the boot manager
======================================
/bootsequence Sets the one-time boot sequence for the boot manager.
/default Sets the default entry that the boot manager will use.
/displayorder Sets the order in which the boot manager displays the
multiboot menu.
/timeout Sets the boot manager time-out value.
/toolsdisplayorder Sets the order in which the boot manager displays
the tools menu.

Commands that control Emergency Management Services for a boot application
==========================================================================
/bootems Enables or disables Emergency Management Services
for a boot application.
/ems Enables or disables Emergency Management Services for an
operating system entry.
/emssettings Sets the global Emergency Management Services parameters.

Command that control debugging
==============================
/bootdebug Enables or disables boot debugging for a boot application.
/dbgsettings Sets the global debugger parameters.
/debug Enables or disables kernel debugging for an operating system
entry.
/hypervisorsettings Sets the hypervisor parameters.


C:\Users\ADMIN>

Vậy nếu sài 2 hệ dieu hanh là windows 7 ổ Z và windows xp ổ C thì làm thế nào vậy ?

cho hoi dong lenh windows 7 viet the nao? bạn vào system properties\ advanced\startup and recorvery rồi bạn bỏ chọn 30s là được